|
Product Details:
Payment & Shipping Terms:
|
| Standard: | GB/T 1002-2021 | Material: | Special Steel |
|---|---|---|---|
| Application: | For Testing 3 Phases Plug And Socket-outlets | Product Name: | Plug Test Gauge, Socket-outlet Test Gauge, Contact Gauge |
| Shippment: | By Express | ||
| High Light: | Single Phase Plug Socket Tester,OEM Plug Socket Tester,Single Phase Contact Gauge |
||
GB/T1002-2021 Single-Phase Plug and Socket-Outlet Test Gauges
1. Introduction
The single phase plug and socket-outlet test Gauges are designed according to GB1002-2021 figures 8/9/10/11/12/13/14/15/16. They are applicable to verify the single phase plugs and fixed or mobile socket-outlets for household with an AC frequency of 50 Hz, rated voltage of 250 V, rated current not exceeding 16A.
2. Parameter
| Standard/figure number | Gauge name | Qty | Test Purpose |
| GB/T 1002-2021, Figure 8 | Single Phase Two-Pole Plug Gauge (≤10A) | 1 | The pins of the plug shall be able to pass the gauges shown in Figures 8 and 9. If the plug pin is provided with an insulating sheath, the insulating sheath part does not need to pass the gauge in Figure 8 and Figure 9. The plugs can smoothly plug-in and pull out in vertical and horizontal directions with a small force shows qualified, Otherwise, the distance between the pins or the inclination and position of the pins do not match. Note: The insertion force should not be greater than the maximum withdrawal force specified in GB/T2099.1. |
| GB/T 1002-2021, Figure 9 | Single Phase Two-Pole with Earth Plug Gauge (10A, 16A) | 2 | |
| GB/T 1002-2021, Figure 10 | Go Gauge for Single Phase Two-Pole socket-Outlet (10A) | 1 | The Go Gauges shall be able to insert into the jacks of the socket-outlet. The Go Gauges can smoothly insert into the jacks of the socket-outlet in verticall directions with a small force shows qualitified. Otherwise, the spacing, inclination, position, jacks of the socket-outlet do not match. Note: The insertion force should not be greater than the maximum withdrawal force specified in GB/T2099.1. |
| GB/T 1002-2021, Figure 11 | Go Gauge for single Phase Two-Pole Socket-Outlet with Earthing (10A, 16A) | 2 | |
| GB/T 1002-2021, Figure 12 | Not Go Gauge for Single Pin of Single Phase Socket-Outlet (10A, 16A) | 2 | The Not Go Gauge shall be not able to insert into the jacks of the socket-outlet. The Not Go Gauge can not smoothly insert into the jacks of the socket-outlet in vertical direction with a small force shows qualitified. Otherwise, the size of jacks of the socket-outlet do not match. Note: The insertion force should not be greater than the maximum withdrawal force specified in GB/T2099.1. |
| GB/T 1002-2021, Figure 13 | Non-Contact Gauge for Single Phase Two-Pole Socket-Outlet (10A) | 1 | Th Non-Contact Gauges shall not be able to contact the live kits of socket-outlet. The non-contact gauges can smoothly insert into the jacks of the socket-outlet in vertical and horizontal directions with a small force, but cannot contact the copper sets (female terminal) shows qualified, Otherwise, the sizes of the socket-outlet does not match. Note: The insertion force should not be greater than the maximum withdrawal force specified in GB/T2099.1. |
| GB/T 1002-2021, Figure 14 | Non-Contact Gauge for Single Phase Two-Pole Socket-Outlet with Earthing (10A, 16A) | 2 | |
| GB/T 1002-2021, Figure 15 | Contact Gauge for Single Phase Two-Poles Socket-Outlet (10A) | 1 | The contact gauge shall be able to contact the live kits of socket-outlet. The contact gauges can smoothly insert into the jacks of the socket-outlet in vertical and horizontal directions with a small force and contact the copper sets (female terminal) shows qualified, Otherwise, the sizes of the socket-outlet does not match. Note: The insertion force should not be greater than the maximum withdrawal force specified in GB/T2099.1. |
| GB/T 1002-2021, Figure 16 | Contact Gauge for Single Phase Two-Poles Socket-Outlet with Earthing (10A,16A) | 2 |
Figures:
3. FAQ
1). Can you provide third-lab calibration certificate?
Answer: Yes, the equipment can send to the third-labs authorized by ISO17025 and get the calibration certificate, but the buyer should undertake the charges.
2). What is the material of the gauges?
Answer: the gauges are made by high-hardness alloy, with rockwell hardness 580 above.
4. COMPETITIVE ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.
2). Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers within 24 hours
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
