Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— ESTI Formation
—— TUV Rheinland Pvt. Ltd
—— LIA Laboratories Limited
—— BSH Group
—— Gamma Illumination Pty Ltd
—— Sigma Connectivity
—— Gallagher Group
—— 유진코퍼레이션에 황동익입니다.
—— Brandt France
—— PPC (Greece)
Legrand is the global specialist in electrical and digital building infrastructures.This is our second cooperation. After comparing the quality and price of several suppliers, they finally chose us as the supplier of this batch of equipment. They requires high quality for equipment, and each equipment must be calibrated by a third-party laboratory.
The impulse voltage generator is a voltage wave tester with a waveform of 1.2μs/50μs. The frontier time is 1.2μs and the half-peak time is 50μs. It conforms to the standards of IEC 60335 and IEC60950 standard, GB/T 17215-1998, GB 7251.1-1997 8.2, IEC60060, IEC1036: 1996, GB/T 16916.1, GB/T 16917.1, GB/T 14048.1-2001 and etc.. The equipment is used to detect the ability of watt-hour meters, low-voltage electrical components to withstand transient over-voltages, and the Electrical clearance and creepage distance. The test voltage is up to 10KV/12KV/15KV
1) Open output voltage: 10KV /12KV/15KV(max)±5%
2) Frontier time: 1.2μs ±30%
3) Half-value time: 50μs ±20%
4) Voltage waveform attenuator: 1000:1
4) Output polarity: positive, negative, positive/negative automatically
5) Output impedance (optional): 2Ω,500Ω±10%
6) Times: 1~9999 times
7) Surge interval: 3~999s
8) Working environment: 15℃~35℃ (temperature), 10%~75% (humidity)
9) Working power: 220V±10% AC, 50/60Hz
10) Dimension: 470mm*260mm*500mm (W*H*D)
11) Weight: 35KG
PLC Control Power Cord Flexing Test Equipment According To IEC60335-1
136 Measurement Points Electrical Safety Test Equipment Temperature Rising Test Corner
IEC60695-11-5 Needle Flame Test Apparatus 95% Butane Gas For Ignition Hazard Test
IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm
Drip Proof Environment Test Equipment Wall Mounting Type For IPX1 And IPX2 Testing
Oscillating Tube Environment Test Equipment With Built In Water Tank 220 V
Hand Held Water Spray Nozzle Tester Brass Material 0 To 0.25 Mpa Pressure Gauge
IEC61000-4-2 EMC Test Equipment , 20 KV Electrostatic Discharge Generator
300 V EMC Test Equipment , Lightning Surge Generator PLC Touch Screen
1.2 / 50 μS EMC Test Equipment High Voltage Surge Generator 50 / 60 Hz
3 Phase Electrical Fast Transient Generator Easy Operation With 16A CDN