1. Introduction:
IP Testing Equipment is a highly reliable device designed to perform waterproof testing in accordance with international standards. According to the description of the national standard “IEC60529 Degrees of Protection Provided by Enclosure (IP Code)", IP code is a coding system to indicate the degree of protection provided by an enclosure against access to hazardous parts, ingress of solid foreign objects, ingress of water and to give additional information in connection with such protection.
2. What is the IPX12?
IPX12 refers to the first characteristic numeral 1 and 2 of degrees of protection against water. Below is a detailed description of the IPX1 and IPX2:
| First Characteristic numeral | Degree of Protection | Test Conditions, see |
| Brief description | Definition |
| 1 | Protected against vertically falling water drops | Vertically falling drops shall have no harmful effects | 14.2.1 |
| 2 | Protected against vertically falling water drops when enclosure tilted up to 15° | Vertically falling drops shall have no harmful effects when the enclosure is titled at any angle up to 15° on either side of the vertical | 14.2.2 |
Generally speaking, IPX1 waterproof test stands for Vertical Water Drop Test and IPX2 waterproof test stands for Vertical Water Drop Test at 15°;, it's suitable for the products with lower waterproof requirements, like small electronic products for ordinary indoor use or simple lamps. And the main functions of the IP waterproof testing equipment are to ensure product quality and stability, enhance product market competitiveness, ensure product safety and reliability, product development and improve work efficiency.
3. Pego IP waterproof testing equipment
Thence, Pego has developed several kinds of ip waterproof test equipment for IPX1 and IPX2 waterproof test level, Pego IPX12 waterproof testing equipment complies with these regulations, providing accurate and repeatable results for manufacturer and it is widely used in various industries, such as electronics, lighting, automotive, building etc. They have different structures, all come with high quality and can pass the calibration from third-party lab authorized by ISO17025.
- First one is the wall-mounting type with high-quality aluminum alloy frame, it needs to be fixed on the wall for testing.
- Second one is the frame type with high-quality aluminum alloy frame and universal wheels, it can be moved freely to different locations for testing.
- Third one is the chamber type with the double-layer structure design of inner box and outer shell, the water can be recycled and there is no limited by the site.
Your message must be between 20-3,000 characters!
