Home News

The difference of low carbon steel vessels in IEC60335-2-6 version 2004 and version 2014

China Pego Group (HK) Company Limited certification
China Pego Group (HK) Company Limited certification
Je viens de recevoir les doigts d essais, Je suis très satisfait , c est très bien

—— ESTI Formation

Dear Alice, The machines are working well now. Thank you for your support and patience to solve our problems and give us very useful suggestions in negotiation. Really a good cooperation.

—— TUV Rheinland Pvt. Ltd

Dear Penny, We really appreciate to buying from Pego Group for several years, all products come with good quality amd easy operation.

—— LIA Laboratories Limited

I have received the spring hammers, they are great!

—— BSH Group

Yes we got the probes and our engineers like them. Thanks.

—— Gamma Illumination Pty Ltd

the spring hammer looks good and works fine

—— Sigma Connectivity

This is to confirm the order has been well received and all is in good order. May I thank you for your very professional service.This has been a pleasant transaction.

—— Gallagher Group

절연강도 시험기 잘 받았습니다. 빠른 배송에 감사드리며 차후 또 다른 제품구입시 연락드리겠습니다.

—— 유진코퍼레이션에 황동익입니다.

I'm Online Chat Now
Company News
The difference of low carbon steel vessels in IEC60335-2-6 version 2004 and version 2014
Latest company news about The difference of low carbon steel vessels in IEC60335-2-6 version 2004 and version 2014

The low-carbon steel test vessels referred in this article is produced in accordance with the requirements of the standard IEC60335-2-6 Figure 102 for testing induction hob elements. In the standard, the wall thickness (A), base thickness, the maximum concavity(C), the diameter (d) and the height (e) are all have detail instructions, and the description is as follows:

 

The vessels are made of low carbon steel having a maximum carbon content of 0.08%. It is cylindrical without metallic handles or protrusions. The diameter of the flat area of the base of the vessel shall be at least the diameter of the cooking zone. The base of the vessel shall not be convex. The concavity of the base of the vessel shall not exceed 0.6% of its diameter.

latest company news about The difference of low carbon steel vessels in IEC60335-2-6 version 2004 and version 2014  0

But for the base thickness, the standard IEC60335-2-6 in version 2014 and version 2004 are slightly different. In the 2004 version, the bottom thickness of all sizes is required to be 2mm±0.5mm. However, in the 2014 version, the requirements for base thickness of each size are different, vessels with d<145mm, the base thickness is required to be 2mm±0.5mm; d=145mm to 240mm, the base thickness is required to be 3mm±0.5mm; d>240mm, and the base is required to be 5mm±0.5mm.

 

The low carbon steel test vessels also can meet the requirement of IEC60335-2-9 figure 104, but the standard IEC60335-2-9 in version 2002 and version 2019, the base thickness has no difference, both are 2mm±0.5mm.

 

Therefore, please confirm the standards to be met with the sales when inquiring, so that we can quote you correctly.

Pub Time : 2021-09-22 15:48:38 >> News list
Contact Details
Pego Group (HK) Company Limited

Contact Person: Ms. Penny Peng

Tel: +86-18979554054

Fax: 86--4008266163-29929

Send your inquiry directly to us (0 / 3000)