|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC60884-1, IEC60068-2-75 | Application: | Plug, Socket-outlet |
|---|---|---|---|
| Material: | Stainless Steel | Warranty: | 12 Months |
| Highlight: | impact testing machine,pendulum impact tester |
||
2J Below Pendulum Impact Test Apparatus with 150g Impact Element 12 Month Warranty
1. Introduction
The pendulum impact test apparatus is Low energy pendulum impact device below 2J, it is consisted by test appartus, impact hammer, sample mounting support and hard wooden block. An impact element made of a polyamide with a radius of 10mm, mass of 150g and rockwell hardness of HT100 is firmly fixed to the lower end of the steel pipe with an outer diameter of 9mm and a wall thickness of 0.5mm, and the steel pipe fulcrum is positioned at the upper end of the steel pipe to make the steel pipe It can only oscillate in the vertical plane, and the axis of the fulcrum should be 1000mm above the axis of the impact element. The sample was mounted on a plywood with a nominal thickness of 8 mm and a length and width of approximately 175 mm. The top and bottom edges of the plywood were securely attached to the rigid bracket of the mounting bracket. The surface-mounted socket and the surface-mounted mounting box are installed on the plywood according to the normal use requirements. The concealed socket should be installed in the groove of a hard wooden block or material with similar mechanical properties. After installation, the whole Fixed on a plywood.
Conforms to standards: GB2099.1-2008 clause 24.1 and figure 22 to 26, B16915.1-2014, IEC884-1 figure 22 to 26, GB2423.55, IEC60068-2-75
Function: Suitable for household and similar plugs and sockets,surface-mounted mounting box, screw glands, covers, switches and other electrical accessories for mechanical strength test
Application: Plug, socket-outlet, surface-mounted mounting box, crew glands, covers, switches and other electrical accessories.
2. Parameters
1). Swing rod: length 1000mm, outer diameter 9mm, wall thickness 0.5mm, mass 100±1g
2). Mounting support: weight 10±1KG, X, Y axis adjustable, can be rotated ±90° around the axis of rotation of the mounting plate
3). Impact hammer: 150g (Equivalent mass 200g), 200g (optional)
4). The impact energy, equivalent mass and drop height are shown in the table below
| Energy/J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 | ||
| Equivalent mass/kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0 .25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Fall height±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
3. Picture:
4. COMPETITIVE ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.
2). Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers within 24 hours
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
