Payment & Shipping Terms:
|Standard:||IEC60529||Material:||SUS304 Stainless Steel|
|Application:||Outdoor Lightings, Household Appliance, Auto Parts||IP Grade:||IPX3 And IPX4|
|Warranty:||12 Months||Control System:||PLC+ Touch Screen|
waterproof test equipment,
water ingress test equipment
IP05 and IP06 Water Ingress Protection Testing Equipment PLC Support with Third-Lab Calibration
|1. Commodity||IPX5-6 Strong Water Spray Test Machine|
Application Background: The water from the nature (rainwater, seawater and river water and etc.) would cause damage to products and material. The damage includes corrosion, color fading, deform, strength degradation, mildew and so on. Especially, it will make the short circuit to electronic products. So waterproof testing is a must test for some special products and materials.
Application; outdoor lighting, household appliance, auto spare parts and other electronics products.
|Function: This machine is mainly applied to simulate the equipment (like electronic products, lighting, electronic components, automobile, motorbike and its spare parts) under the raining conditions, and to check if its physical and other relative performances can reach the requirements.|
|4. Standard||Meet the requirements of IEC60529:1989+A1:1999+A2:2013, GB4208-2008 Clauses 14.2.5 and 14.2.6 and figure 6, GB7000.1 clauses 9.2.6 and 9.2.7and figure 9.5.|
● Apply to IPX5 and IPX6 testing
● The shells and turntable are made by SUS304# stainless steel, to make sure rustless for long time use.
● Built-in water tank, with ball valve to control the inflow, and with low water-level alarm to prevent from damage caused by hydropenia. The thermometer is to display the temperature of the tank.
● Parts of electrical appliances of turntable are omniseal to prevent electric leakage.
● The turntable adopts step motor, the speed is within the range of standard can not be adjustable, and can control the positive and negative direction (for live test, to prevent the winding) .
● The flow rate can be adjusted by flowmeter (manual regulation)
● Jet nozzles: designed according to IEC60529
● There is an outlet on the turntable for samples (AC220V, 10A), on-off time can be control by program: off (0~999min)-on (0~999min)-off (0~999min).It is apply to live test.
● The test time can be set up by touch screen, time setting range: 0~999min (adjustable), and auto stop after test.
● Control system adopts 7 inch touch screen and PLC( Panasonic), the electrical components are made by LG, OMRON and other famous brands.
● One button to switch between IPX5 and IPX6 testing, sudden stop button for urgent accident.
|6. Specification||Structure Parameter|
|Outer size||1000mm*800mm*1300mm (L*D*H)|
|Water tank capacity||550L, size: 800*600*1145(mm)|
|Turntable size||Dia. 600mm|
|IPX5 nozzle diameter||Dia. 6.3mm|
|IPX6 nozzle diameter||Dia. 12.5mm|
|Thermometer||K type thermocouple + temperature display|
|IPX6 flowmeter||100±5 (L/min)|
|Control mode||Manual adjustment (flowmeter)|
|Distance||2.5-3m (control by user)|
|Nozzle fixed mode||Holder height 3m-2m|
|Turntable Lifting range||None (fixed)|
|Control system||7 touch screen +PLC|
|Power supply for equipment||380V|
|Power supply for EUT||220V|
|Protection device||Leakage protection, Lack of water protection, short-circuit protection|
|Case||304# stainless steel||1|
|Water tank||304# stainless steel||1|
|Turntable||304# stainless steel||1|
|IPX5 jet nozzle||304# stainless steel||1|
|IPX6 jet nozzle||304# stainless steel||1|
|Water Pump||VM6-8.5*8T, stainless steel||1|
|Pipeline fitting||PPR+stainless steel||1|
|Low voltage apparatus||/||1|
|PLC controller||FR-XO L30R||1|
|8. Accessories||User Manual, Certificate of Quality, Warranty Card, Waterproof Socket (IP66), 5-core Cable (3m)|
|9. Working Condition||User shall provide the below conditions and make the connection|
|10. Location Request||
● Flat floor, Smooth drainage, the floor and wall with water repellent treatment, set the gutter and drainage ditch
● The ground bearing shall not less than 200KG/m2
● With excellent ventilation
● Nonviolent vibration
● Non-strong electromagnetic field
● No flammable, no explosive and no corrosivity substance, no dust
● With appropriate use and maintenance space
● Rear side, left side, right side, top: 800mm
● Front side: 1000mm
|11. Environment conditions||
Air Pressure: 86kPa～106kPa
|12. Power Condition|
|Voltage, frequency||AC380V±10% , 50Hz±10%, 3 phase 4 wires+earth wire|
● Request to equip with appropriate air switch for the equipment at the site, and the air switch is only work for this equipment
● Forbidden to use knife switch and power plug
● No more than 2m between air switch and equipment
● Request to equip with water supply, and hydraulic pressure shall not lower than 0.2Mpa, and install 4’’ faucet.
● The faucet should be installed at the position away from the equipment no more than 2m.
4. Third-Lab Calibration Certificate
Contact Person: sales