|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC60068-2-75, IEC62262, IEC60598, EN50102 | Test IK Level: | IK07, IK08, IK09, IK10 |
|---|---|---|---|
| Usage: | IK Level Mechanical Impact Testing Machine | Material: | Aluminum Frame+steel Hammers |
| Warranty: | 12 Months | Shipment: | By Sea |
| Highlight: | IK Pendulum Impact Testing Machine,IEC60598 Pendulum Impact Testing Machine,20J Steel Hammers Test Apparatus |
||
IK Level Pendulum Impact Testing Machine Equip with 2J / 5J /10J / 20J Steel Hammers
1. Introduction
The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Ehc and IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS EN 50102:1995 and amended in 1998, following its adoption as an international standard (IEC 62262) in 2002, the European standard was renumbered EN 62262. The IK code is from 00 to 10, and corresponding impact energy is from 0.14J to 20J.
IK pendulum hammer is for IK07 to IK10 testing, the hammer is made by steel, the working principle is : the sample is placed in normal, then adjust the impact points, and position the impact device, then release the hammer to freely impact the hammer. The impact angle and impact height are adjustable.
The test rig is made of aluminum alloy, with four wheels at the bottom, and the whole device can move freely.
2. Parameter
| Swing Pipe | Steel pipe (Length: 1000mm, outer diameter: 15.9mm, thickness: 1.5mm), equip with hammers to equivalent mass |
| Impact angle | 0~900 |
| Lifting stroke | 200-1200mm |
| Impact hammers | 0.5kg, 1.7kg, 5kg, 5kg steel hammers for IK08 to IK10 Pendulum impact |
| Impact energy: | 2J, 5J, 10J, 20J |
4. Characteristics of Striking Elements
| Characteristics of Striking Elements | ||||||||
| Energy/J |
≤1 ±10% |
2 ±5% |
5 ±5% |
10 ±5% |
20 ±5% |
50 ±5% |
||
| Equivalent mass±2%kg | 0.25(0.2) | 0.5 | 1.7 | 5 | 5 | 10 | ||
| Material | Nylon | steel | ||||||
| R/mm | 10 | 25 | 25 | 50 | 50 | 50 | ||
| D/mm | 18.5(20) | 35 | 60 | 80 | 100 | 125 | ||
| f/mm | 6.2(10) | 7 | 10 | 20 | 20 | 25 | ||
| r/mm | - | - | 6 | - | 10 | 17 | ||
| l/mm | Depends | |||||||
5. Fall Height
| Fall Height | |||||||||||||||
| Energy/J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 | ||
| Equivalent mass/kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0 .25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Fall height±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
6. Degrees of protection against external mechanical impacts
| IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 |
| 0.14J | 0.2J | 0.35J | 0.5J | 0.7J | 1J | 2J | 5J | 10J | 20J |
7. Picture
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
