|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC60068-2-75, IEC62262, IEC60598, EN50102 | Test IK Level: | IK07, IK08, IK09, IK10 |
|---|---|---|---|
| Usage: | IK Level Mechanical Impact Testing Machine | Material: | Aluminum Frame+steel Hammers+steel Guideway |
| Working Power: | 220V/50Hz | Warranty: | 12 Months |
| High Light: | IK Vertical Impact Testing Machine,10J Vertical Impact Testing Machine,Electromagnet Release Vertical impact hammer |
||
IK Level Vertical Impact Testing Machine Electromagnet Release 2J / 5J /10J / 20J Steel Hammers
1. Introduction
IK Vertical impact hammer designed according to IEC60068-2-75 test Eha and IEC62262 (equivalent EN62262) , and can meet the test requirements of IEC60598, EN50102.The IK code is from 00 to 10, and corresponding impact energy is from 0.14J to 20J.
IK vertical impact hammer is for IK07 to IK10 testing, the hammer is made by steel. The hammer is released by electromagnet to ensure instantaneous release and vertical drop, the bottom of guide pipe contact with the surface of sample, that is the fall height, user do not need to adjust, it is easy to operate
2. Parameter
|
Travel height |
0-1000mm |
|
Hammer |
2J, 5J, 10J, 20J |
|
Guideway |
400mm*Ø35mm, 300mm*Ø60mm, 200mm*Ø80mm, 400mm*Ø100mm |
| Impact hammers | 0.5kg, 1.7kg, 5kg, 5kg steel hammers for IK07 to IK10 Vertical impact |
| IK test levels | IK07, IK08, IK09, IK10 |
3. Characteristics of Striking Elements
| Characteristics of Striking Elements | ||||||||
| Energy/J |
≤1 ±10% |
2 ±5% |
5 ±5% |
10 ±5% |
20 ±5% |
50 ±5% |
||
| Equivalent mass±2%kg | 0.25(0.2) | 0.5 | 1.7 | 5 | 5 | 10 | ||
| Material | Nylon | steel | ||||||
| R/mm | 10 | 25 | 25 | 50 | 50 | 50 | ||
| D/mm | 18.5(20) | 35 | 60 | 80 | 100 | 125 | ||
| f/mm | 6.2(10) | 7 | 10 | 20 | 20 | 25 | ||
| r/mm | - | - | 6 | - | 10 | 17 | ||
| l/mm | Depends | |||||||
4. Fall Height
| Fall Height | |||||||||||||||
| Energy/J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 | ||
| Equivalent mass/kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0 .25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Fall height±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
5. Degrees of protection against external mechanical impacts
| IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 |
| 0.14J | 0.2J | 0.35J | 0.5J | 0.7J | 1J | 2J | 5J | 10J | 20J |
6. Picture
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
