|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC60068-2-75 Test Ehc | Impact Energy: | 2J, 5J, 10J, 20J, 50J |
|---|---|---|---|
| Test IK Level: | IK07, IK08, IK09, IK10, IK20 | Material: | Fe 490-2 |
| Release Mode: | Manual | Warranty: | 12 Months |
| High Light: | Manual Release Vertical Impact Hammers,IK10 Vertical Impact Hammers,IK09 Manual Release Steel Hammers |
||
IK07/ IK08 / IK09 / IK10 Manual Release Vertical Impact Hammers
1. Introduction
The vertical impact hammer is designed according to IEC60068-2-75 test Ehc, the hammer consists by a striking element which falls freely from rest through a vertical height on to the specimen surface held in a horizontal plane, and the fall of the striking element shall be along a guideway, the guideway shall not rest on the specimen and the striking element shall be free of the guideway on the striking the specimen. 2J striking element equip with Φ36mm*400mm guideway, 5J striking element equip with Φ61mm*300mm guideway, 10J striking element equip with Φ81mm*200mm guideway, 20J striking element equip with Φ101mm*400mm guideway, 50J striking element equip with Φ126mm*500mm guideway.
2. Parameter
| Impact hammers | 0.5kg, 1.7kg, 5kg, 5kg and 10kg steel hammers for IK07 to IK20 vertical impact testing |
| Impact energy | 2J, 5J, 10J, 20J, 50J |
| Size of guideway (diameter *height) | Φ37mm*400mm, Φ64mm*300mm, Φ85mm*200mm, Φ104mm*400mm, Φ129mm*500mm |
| Release mode | Manual release |
3. Characteristics 0f Striking Elements
| Energy/J |
≤1 ±10% |
2 ±5% |
5 ±5% |
10 ±5% |
20 ±5% |
50 ±5% |
||
| Equivalent mass±2%kg | 0.25(0.2) | 0.5 | 1.7 | 5 | 5 | 10 | ||
| Material | Nylon | steel | ||||||
| R/mm | 10 | 25 | 25 | 50 | 50 | 50 | ||
| D/mm | 18.5(20) | 35 | 60 | 80 | 100 | 125 | ||
| f/mm | 6.2(10) | 7 | 10 | 20 | 20 | 25 | ||
| r/mm | - | - | 6 | - | 10 | 17 | ||
| l/mm | Depends | |||||||
 |
||||||||
4. Height of fall
| Energy(J) | 2 | 5 | 10 | 20 | 50 |
| Equivalent Mass (kg) | 0.5 | 1.7 | 5 | 5 | 10 |
| Height of fall mm±1% | 400 | 300 | 200 | 400 | 500 |
5. Degrees of protection against external mechanical impacts
| IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 |
| 0.14J | 0.2J | 0.35J | 0.5J | 0.7J | 1J | 2J | 5J | 10J | 20J |
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
