logo
Pego Electronics (Yi Chun) Company Limited
Home ProductsEnvironment Test Equipment

IEC60529 Compliance Brass Nozzle Waterproof Tester with 10L/min Flow Rate for IPX3 and IPX4 Testing Equipment

All Products
Electrical Safety Test Equipment (186)
Environment Test Equipment (72)
Impact Test Equipment (74)
EMC Test Equipment (24)
Lamp Cap Gauge (29)
Test Finger Probe (103)
Plug Socket Tester (78)
Appliance Couplers Testing Equipment (12)
Induction Cooker Vessels (22)
IP Testing Equipment (68)
Type C Goniophotometer (7)
Led Testing Equipment (32)
Integrating Sphere Spectrophotometer (6)
Transformer Testing Equipment (10)
Ac Dc Power Supply (7)
china Pego Electronics (Yi Chun) Company Limited certification
china Pego Electronics (Yi Chun) Company Limited certification
Je viens de recevoir les doigts d essais, Je suis très satisfait , c est très bien

—— ESTI Formation

Dear Alice, The machines are working well now. Thank you for your support and patience to solve our problems and give us very useful suggestions in negotiation. Really a good cooperation.

—— TUV Rheinland Pvt. Ltd

Dear Penny, We really appreciate to buying from Pego Group for several years, all products come with good quality amd easy operation.

—— LIA Laboratories Limited

I have received the spring hammers, they are great!

—— BSH Group

Yes we got the probes and our engineers like them. Thanks.

—— Gamma Illumination Pty Ltd

the spring hammer looks good and works fine

—— Sigma Connectivity

This is to confirm the order has been well received and all is in good order. May I thank you for your very professional service.This has been a pleasant transaction.

—— Gallagher Group

절연강도 시험기 잘 받았습니다. 빠른 배송에 감사드리며 차후 또 다른 제품구입시 연락드리겠습니다.

—— 유진코퍼레이션에 황동익입니다.

I am sending this email to let you know that we receive the 2 vessels with the calibration certificate. I would like to thank you for the quality of the vessels and for your good work. I can’t wait to work with you on other topics.

—— Brandt France

we can confirm that it works very well! thank you for the good quality equipment.

—— PPC (Greece)

I'm Online Chat Now

IEC60529 Compliance Brass Nozzle Waterproof Tester with 10L/min Flow Rate for IPX3 and IPX4 Testing Equipment

IEC60529 Compliance Brass Nozzle Waterproof Tester with 10L/min Flow Rate for IPX3 and IPX4 Testing Equipment
IEC60529 Compliance Brass Nozzle Waterproof Tester with 10L/min Flow Rate for IPX3 and IPX4 Testing Equipment
video play

Large Image :  IEC60529 Compliance Brass Nozzle Waterproof Tester with 10L/min Flow Rate for IPX3 and IPX4 Testing Equipment

Product Details:
Place of Origin: China
Brand Name: Pego Electronics
Certification: Third-Lab Calibration Certificate
Model Number: IPX34AS
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: woodencase
Delivery Time: 20 business days
Payment Terms: T/T,PayPal
Contact Now
Detailed Product Description
Reference Standard: IEC60529, IEC61851, IEC62196-1 Configuration: Spray Nozzle, Control Chamber
Material Of Nozzle: Brass Application: For Testing Household Appliance, Luminaire, Auto Parts And Charging Station
Working Power: 220V/50Hz
Highlight:

IEC60529 Compliance Waterproof Tester

,

Brass Nozzle Spray Nozzle Tester

,

10L/min Flow Rate IPX3 and IPX4 Testing Equipment

IEC60529 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester
The IPX34 spray nozzle waterproof tester is engineered for comprehensive ingress protection testing according to international standards, ensuring reliable performance for electrical and electronic products exposed to rain and water spray conditions.
Product Overview
Designed and manufactured in compliance with IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5, this testing equipment is essential for certification agencies and manufacturers conducting waterproof testing on outdoor electrical and electronic products. The system features a robust construction with brass nozzle, movable water baffle, counterweight, pressure gauge, and stainless steel valve components.
Compliance Standards
  • IEC60529 Degrees of protection provided by enclosures (IP Code) Figure 5
  • IEC60598-1 Luminaires - Part 1: General requirements and tests
  • ISO20653 Road Vehicles - Degrees of protection (IP-Code)
  • GB4208, GB7000.1, GB17761 standards
Technical Specifications
Parameter Specification
Model IPX34AS
Control Box Dimensions 870mm * 600mm * 950mm
Spray Nozzle Dimensions 370mm * 115mm * 165mm
Spray Nozzle Diameter 102mm
Number of Holes 121
Hole Diameter Φ0.5mm
Hole Configuration 1 center hole, 2 inner circles of 12 holes at 30° pitch, 4 outer circles of 24 holes at 15° pitch
Water Inlet Diameter Φ16mm
Water Pipe Diameter Φ28mm
Flow Rate 10L/min ±5%
Flow Adjustment Manual adjustment
Water Pressure Range 50-150Kpa
Flow Display Glass flow meter
Water Tank Capacity 150L
Power Supply 220V/50Hz
Installation Requirements
Water Source
User must provide water source with minimum pressure of 0.2Mpa and install 4/8 inch faucet within 2 meters of equipment.
Site Requirements
Level ground, unobstructed drainage, waterproofed surfaces, and provision of floor drain or drainage ditch.
Product Demonstration
View IPX34 Spray Nozzle Testing Equipment Video
Product Image
IEC60529 Compliance Brass Nozzle Waterproof Tester with 10L/min Flow Rate for IPX3 and IPX4 Testing Equipment 0

Ratings & Review

Overall Rating

5.0
Based on 50 reviews for this supplier

Rating Snapshot

The following is the distribution of all ratings
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%

All Reviews

Κουτάντος Γρηγόριος
Greece Jan 24.2023
Helpful (1)
we can confirm that it works very well! thank you for the good quality equipment.
D
David borland
New Zealand Aug 7.2019
Helpful (1)
This is to confirm the order has been well received and all is in good order. May I thank you for your very professional service. This has been a pleasant transaction.
J
Jack Adams
United Kingdom May 22.2017
Helpful (1)
Dear Penny, We really appreciate to buying from Pego Group for several years, all products come with good quality and easy operation.
Tag:

temperature humidity test chamber,

environmental test chamber,

environmental testing equipment

Contact Details
Pego Electronics (Yi Chun) Company Limited

Contact Person: Ms. Penny Peng

Tel: +86-18979554054

Fax: 86--4008266163-29929

Send your inquiry directly to us (0 / 3000)

Electrical Safety Test Equipment

PLC Control Power Cord Flexing Test Equipment According To IEC60335-1

136 Measurement Points Electrical Safety Test Equipment Temperature Rising Test Corner

IEC60695-11-5 Needle Flame Test Apparatus 95% Butane Gas For Ignition Hazard Test

IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm

Environment Test Equipment

Drip Proof Environment Test Equipment Wall Mounting Type For IPX1 And IPX2 Testing

Oscillating Tube Environment Test Equipment With Built In Water Tank 220 V

IEC60529 CNAS Environment Dust Test Chamber for IP5X and IP6X Tests With Transparent Observation Window

Hand Held Water Spray Nozzle Tester Brass Material 0 To 0.25 Mpa Pressure Gauge

EMC Test Equipment

IEC61000-4-2 EMC Test Equipment , 20 KV Electrostatic Discharge Generator

300 V EMC Test Equipment , Lightning Surge Generator PLC Touch Screen

1.2 / 50 μS EMC Test Equipment High Voltage Surge Generator 50 / 60 Hz

3 Phase Electrical Fast Transient Generator Easy Operation With 16A CDN

Request A Quote

E-Mail | Sitemap

Mobile Site
Privacy Policy | China Good Quality Electrical Safety Test Equipment Supplier. © 2018 - 2025 Pego Electronics (Yi Chun) Company Limited. All Rights Reserved.