Home ProductsElectrical Safety Test Equipment

45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695

China Pego Group (HK) Company Limited certification
China Pego Group (HK) Company Limited certification
Je viens de recevoir les doigts d essais, Je suis très satisfait , c est très bien

—— ESTI Formation

Dear Alice, The machines are working well now. Thank you for your support and patience to solve our problems and give us very useful suggestions in negotiation. Really a good cooperation.

—— TUV Rheinland Pvt. Ltd

Dear Penny, We really appreciate to buying from Pego Group for several years, all products come with good quality amd easy operation.

—— LIA Laboratories Limited

I have received the spring hammers, they are great!

—— BSH Group

Yes we got the probes and our engineers like them. Thanks.

—— Gamma Illumination Pty Ltd

the spring hammer looks good and works fine

—— Sigma Connectivity

This is to confirm the order has been well received and all is in good order. May I thank you for your very professional service.This has been a pleasant transaction.

—— Gallagher Group

절연강도 시험기 잘 받았습니다. 빠른 배송에 감사드리며 차후 또 다른 제품구입시 연락드리겠습니다.

—— 유진코퍼레이션에 황동익입니다.

I'm Online Chat Now

45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695

small.img.alt small.img.alt

Large Image :  45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695

Product Details:
Place of Origin: China
Brand Name: PEGO GROUP
Certification: Third-lab calibration certificate
Model Number: NF-1H
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: USD3100-USD4500/set
Packaging Details: each packed in a wooden case, 115*75*144cm
Delivery Time: 15 working days
Payment Terms: T/T, Western Union, MoneyGram
Detailed Product Description
Reference Standard: IEC60695-11-5 (IEC60695-2-2), EN60695, GB/T51669.5, GB4706.1 Shell Material: Coating Metal Sheet
Name: Fire Hazard Testing Equipment Controller: Single Chip And Push Button
Dimension: 1000mm(W)*650mm(D)*1300mm (H) Working Power: Single Phase 220V/50-60Hz
Warranty: 12 Months Shipment: By Sea Or Air
High Light:

electrical testing instruments


electric test meter

IEC60695 45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment


1. Introduction

The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material’s ignition risk and fire resistance by a simulation technique the fire.

The needle flame test apparatus is controlled by single chips and push buttons, the shell is made of coating metal sheet. The test apparatus is built-in air exhaust. The front panel is transparent for easy observation of the experimental process. Avoid gas leakage explosion caused by circuit leakage or short circuit, the equipment has self-contained gas flow size alarm device.


2. Parameter


Inner diameter: Φ 0.5mm ± 0.1mm

Outer diameter: ≤Φ 0.9mm

Length: 35mm,

Material: stainless steel

Burner angle 450 or 900
Ignition layer White pine board with thickness 10mm, and cover with wrapping tissue 12g/m2 ~30g/m2
Application time 0-999.9s±0.1s adjustable (normally 30s)
Burning duration 0-999.9s±0.1s (auto record, manual pause)
Flame height 12mm ± 1mm (adjustable), Measuring with a steel ruler
Burn gas ≧95% butane gas or propane gas
Flame requirement rising time from 100℃±2℃ to 700℃±3℃ should within 23.5s±1s
Thermocouple Φ0.5mm K type thermocouple (The insulating sleeve heat resist to 1100 ℃)
Temperature sensor Copper with Φ4mm and 0.58±0.1g weight, equip with K type thermocouple
Thermal radiation baffle Automatic masking
Safe operation interface automatically power off upon open the glass window
Test space ≥ 0.5m3 , matte black background, illuminance ≤ 20Lux, exhaust hole: Φ70mm (Power on automatic work)
Test period auto control
Pick-up tray Yes
Gas calibration device Built-in temperature measuring box, gas calibration can be executed before test
Standard IEC60695-11-5 (IEC60695-2-2), EN60695, GB/T51669.5, GB4706.1
Equipment size 1000mm(W)*650mm(D)*1300mm (H)
Power supply AC220±10%, 50Hz, 0.3KVA


3. Working studio

 45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695 0


4. FAQ

1). What is the warranty period of the equipment?
Answer: the equipment warranty is 12 months upon you receipt of the equipment


2). Can you provide third-lab calibration certificate?
Answer: Yes, the equipment can send to the third-labs authorized by ISO17025 and get the calibration certificate, but the buyer should undertake the charges.


3). What is the working power of the equipment? 
Answer: single phase 220v/50-60Hz


4). What is the language of the operation interface?

Answer: English 

Contact Details
Pego Group (HK) Company Limited

Contact Person: sales

Tel: +8618979554054

Send your inquiry directly to us (0 / 3000)