|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC(EN) 60350-2 Figure 4 | Material: | Low Carbon Steel |
|---|---|---|---|
| Warranty: | 12 Months | Dimension: | 145mm, 180mm, 220mm |
| Highlight: | EC60350-2 Stainless Steel Test Vessels,AISI430 Stainless Steel Test Vessels,220mm Stainless Steel Vessels For Cooking |
||
IEC60350-2 1.4016 stainless steel Test Vessels with Aluminum Lids
1. Introduction
The vessels are designed according to EN60350-2:2013 figure ZB.1, the wall of the vessel is made of 1.4301 stainless steel, the bottom of the vessel is made of 1.4016 stainless steel, and the lid is made of aluminum.
2. Parameter
Sizes of Standardised Cookware and Water Amounts
|
Diameter of the cookware bottom (outstide) mm |
Diameter of the lid mm |
Lid holde circle diameter mm |
Number of holes on the circle |
Total cookware height (outside) mm |
Flatness of cookware bottom mm |
Water load g |
Cooking zone size category mm |
Standardised cookware categories |
| 120±0.5 | 130±1 | 80±1 | 7 | 125±0.5 |
≥0 <0.075 |
650 |
≥100 <130 |
A |
| 150±0.5 | 165±1 | 110±1 | 11 | 125±0.5 |
≥0 <0.075 |
1030 |
≥130 <160 |
|
| 180±0.5 | 200±1 | 140±1 | 16 | 125±0.5 |
≥0 <0.075 |
1500 |
≥160 <190 |
B |
| 210±0.5 | 230±1 | 170±1 | 22 | 125±0.5 |
≥0 <0.1 |
2050 |
≥190 <220 |
C |
| 240±0.5 | 265±1 | 200±1 | 29 | 125±0.5 |
≥0 <0.1 |
2700 |
≥220 <250 |
|
| 270±0.5 | 300±1 | 230/210a±1 | 18/18a | 125±0.5 |
≥0 <0.15 |
3420 |
≥250 <280 |
D |
| 300±0.5 | 330±1 | 260/210a±1 | 23/22a | 125±0.5 |
≥0 <0.15 |
4240 |
≥280 <310 |
|
| 330±0.5 | 365±1 | 290/270a±1 | 27/27a | 125±0.5 |
≥0 <0.15 |
5140 |
≥310 ≤330 |
|
|
Number of holes are arranged on two hole circles |
||||||||
Pictures:
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
