|
Product Details:
Payment & Shipping Terms:
|
| Application: | Streetlight, Spotlight, Downlight | Working Power: | 220V/50Hz |
|---|---|---|---|
| Warranty: | 12 Months, Life-long Maintenance | Shippment: | By Sea |
| High Light: | luminous intensity meter,luminaire goniophotometer |
||
C-γ LED Luminous Intensity Test Goniophotometer Single Pillar for Streetlight and Spot Light
1. Introduction
Sinlge Pillar Goniophotometer Test System (Luminous Intensity Distribution Test System) is designed according to LM-79 and CIE standard regarding C-γ test solution, widely applied to test LED,HID,CFL and other luminaire, like floodlight, dowlight, panel light, streetlight and so on. The measuring parameters includes spatial intensity distribution curve, cross section spatial intensity distribution curve, isolux distribution curve, luminance limitation curve,area luminous flux,luminaries efficiency, UGR glare class, total luminous flux,effective luminous flux,utilization factor and etc. All the test data can be saved as IES file which can input to Dialux directly, also the data can be output as PDF and excel files for analysis purpose.
1)For Indoor Lighting fixture: upward light ratio, downward light ratio, max allowable spacing height ratio, luminaire limitation curve, utilization factor,budgetary estimate table.
2)For floodlight: half peak side angle, type B luminous intensity distribution data, zonal luminous flux distribution data, space luminous intensity curve.
3) For streetlight: max allowable spacing height ratio, upward light ratio, downward light ratio, zonal flux, luminous intensity, utilization factor.
2. Application
LED luminiare includes: downlight, spotlight, streetlight
3. Reference Standard
1) CIE Pub. NO.70, “The Measurment of Absolute Luminous Intensity Distributions”
2) CIE DIV.Ⅱ-TC10, “Photometry of Luminaires”
3) CIE Pub.NO.76, “Photometry-the CIE Sytstem of Physical Photometry”
4) CIE 121-1996 “The Photometry of Goniophotometer of Luminaries”
5) IESNA LM-75 “Goniophotometer Types and Photometric Coordinates”
6) IESNA LM-79 “Electrical and Photometric Measurements of Solid-state Lighting Products”
7) IESNA-1971(73-96) “IES Practical Guide to Photometry”
8) IESNA 61341 “Method of Measurement of Center Beam Intensity and Beam Angle(s) of Reflector Lamp”
3. Configuration
| Product name | decription | Quantity |
|
single Pillar Goniophotometer with photo-detetor |
380nm to 780nm, includes rotating console, photo-detetor, double channel photometer, cross-beam laser alignment device, clamps | 1 set |
|
AC Digital Power Meter |
range: 500V/20A, to test electric parameters | 1 set |
|
CC&CV DC Power Supply |
30V/ 10A, 300W max, output current: 0~10A, output voltage: 0~30V |
1 set |
|
AC power supply |
Output power: 1000W, output frequency: 45.00~70Hz, ouput voltage: 0~300V | 1 set |
| Standard Lamps |
Made by OSRAM,tracable to NIM, 380nm~780nm |
2 pieces |
| Cabinet | 19 inch, with heat sink | 1 set |
| Software | english software run under win 7 system | 1 piece |
4. Parameters
|
Illuminance |
0.01lx~99999lx |
|
Accuracy of photometry |
1% |
|
Photometry linear |
0.2% |
|
Stray light |
less than 0.1% |
|
Angle accuracy |
0.20 |
| Linear | 0.5% |
|
Angle resolution |
γ angle 0.10, C angle 0.10 |
|
Test distance |
2m~10m |
|
Can test max lamp (with lamp fixture) size |
φ 1300*400(mm), 20KG, 2 lines 300V/10A, AC/DC |
|
test solution |
Single pillar structure (C-γ and conic coordinate) |
5. Pictures
6. Lab requirement
1) Dark room dimension: 3m(H)*2.5m(W)*8m(L) above, or designed according to lamp size and lab size. The rotating console and detector are put in dark room. Dark room (includes wall, ceiling and floor) should be coated with dull dark paint, or be covered with black carpet or black cloth.
2) Control room: 2.5m(H)*3m(W)*3m(L). The control cabinet, computer and printer are put in control room.
3) The temperature of dark room should be controlled by air conditioner according to CIE requirement.
4) Pego will provide lab design support according to actual conditions after order confirmed.
7. COMPETITIVE ADVANTAGE
1. PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.
2. Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.
3.Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.
4. After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.
5. Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.
6. Prompt Response to Customers: we promise to reply our customers within 24 hours
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
