|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC60529, IEC61032, IEC60065，IEC60598 | Force Applied: | 0~3N |
|---|---|---|---|
| Quality: | High Grade Quality Guarantee | Material: | Plastic + Stainless Steel |
| Application: | Lab Testing Equipment | IP Code: | IP3X |
| Highlight: | ul articulated finger probe,finger probe test |
||
PG - TPC IP3X Test Finger Probe Lab Testing Equipment equipped with 42V Electrical Indicator
1. Standard of IP3X Test Finger Probe:
IEC61032-1 Figure 3, IEC/EN60529 IP3X, IEC60065, IEC60598 etc.
2. Test Sample of IP3X Test Finger Probe:
Easily accessible enclosure live parts or mechanical parts.
3. Introduction of IP3X Test Finger Probe:
The IP3X Test Finger Probe is designed according to IC61032 figure 3, meet the requirements of IEC60529-IP3, IEC60065,IEC60598 and etc. This rod is intended to verify the protection of persons against access to hazardous parts. It is used to verify protection against access with a tool.
4. Application of IP3X Test Finger Probe:
The IP3X finger test probe can be used for enclosure protection test when open threaded hole of M6 at the end of the handle, the hole can be connected with pull and push gauge. The test finger probe also can be used for anti-electric shock test when equipped with 42V electrical indicator.
5. Parameter of IP3X Test Finger Probe:
| Length of test rod: | 100mm | Diameter of test rod: | 2.5mm |
| Diameter of stop sphere: | 35mm | Diameter of handle: | 10mm |
| Length of handle: | 100mm | Thruster (optional): | 3N |
| Material: Insulating material (handle, sphere), metal (test rod) | |||
Classification of the test probes
According to their designation, the test probes can be classified as:
According to the kind of protection they are intended to check:
According to the specific hazard they are intended to check:
Definitions
Access probe: a test probe simulating in a conventional manner a part a person or a tool, or the like , held by a person to verify adequate clearance from hazardous parts.
Object probe: a test probe simulating a solid foreign object to verify the possibility of ingress into an enclosure.
IP code probe: a test probe to verify the degrees of protection specified in IEC60529.
Other probe: a test probe, different from IP code probes.
Adequate clearance for protection against access to hazardous parts: a distance to prevent contact or approach of an access probe to a hazardous part.
List of probes
| Probes and application | Probe code | Short description | Force to be applied |
| Access probes of IEC60529 (IP code) | Probe A | Sphere:Φ50 with handle | 50 |
| Probe B | Jointed test finger | 10 | |
| Probe C | Rod: Φ2.5-length 100 | 3 | |
| Probe D | Wire: Φ1.0-length 100 | 1 | |
| Object probes of IEC60529 (IP code) | Probe 1 | Sphere: Φ50 | 50 |
| Probe 2 | Sphere: Φ12.5 | 30 | |
|
Other access probes Persons against access to hazardous live parts or hazardous mechanical parts |
Probe 11 | Unjointed test finger | 50 |
| Probe 12 | Cylindrical pin: Φ4-length 50 | ||
| Probe 13 | Conincal pin: Φ3 to 4-length 15 | ||
| Probe 14 | Bar: 3*1 | 20 | |
| Probe 15 | Deleted | ||
| Probe 16 | Deleted | ||
| Probe 17 | Wire: Φ0.5 | ||
| Probe 18 | Small finger probe: Φ8.6-length 57.9 | 10 | |
| Probe 19 | Small finger probe: Φ5.6-length 44 | 10 | |
|
Other access probes Persons against access to hazardous mechanical parts |
Probe 31 | Cone: Φ110/60 | 50 |
| Probe 32 | Rod: Φ 25 | 30 | |
| Probe 33 | Delected | ||
|
Other access probes Persons against access to hot or glowing parts |
Probe 41 | Probe: Φ 30 | |
| Probe 42 | Deleted | ||
| Probe 43 | Bar: 50*5 |
Pego Tester has the full sets of test probes, please contact the sales to get more information.
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
