|Standard:||IEC61000-4-2||Product Name:||ESD Simulator, ESD Gun|
|Display:||Diode Display||Usage:||EMC Testing Equipment|
|Warranty:||12 Months||Working Power:||220V/50Hz|
electrical testing instruments,
electric test meter
ESD-2000 EMC Test Equipment for Electrostatic Immunity Test IEC61000-4-2 Diode Display
The ESD simulator is also known as ESD gun, it is a hand-held unit used to test the immunity of devices to electrostatic discharge (ESD) according to the standard IEC61000-4-2. The ESD simulator is designed for the assessment of electrical and electronic equipment to withstand ESD performance. Electrostatic discharge generator is widely apply to the fields of industry control equipment, household appliance, chemical electronics,communication electronics,components, auto control equipment and etc. There is two test methods: contact discharge and air discharge, the test voltage extends from 0.1KV to 20KV (ESD-2000) or 30KV (ESD2005), which can cover the most strictly test requirement, and user can freely choose and define the test grade.
The ESD generator is consisted by ESD generator, ESD gun and two electrodes (cone sharp electrode is for contact discharge, and ball sharp electrode is for air discharge), the parameters of rising time, peak current and current at 30ns and 60ns are strictly meet the requirement of IEC61000-4-2.
|Trigging mode||SINGLE, COUNT, 20PPS, *|
|Discharge mode||Air discharge, contact discharge|
|Discharge interval||0.1～9.9s (0.05S @ 20pps mode)|
|Numbers of discharge||0～999|
|Energy storage capacitance||150pF±10％|
|discharge electrode||Conical contact discharge electrode and spherical air discharge electrode|
|Air discharge voltage keep time||More than 5S|
|Working environment||Ambient temperature:10℃～35℃ humidity:30％～60％|
|Dimension and weight||250×210×130mm(D×W×H)/4kg|
3. Electrostatic Discharge Test Bench
|Reference Grounding Plane||
|Horizontal Coupling Plane||
|Vertical Coupling Plane||
4. ESD Gun Structure
1). What is the warranty period of the equipment?
Answer: the equipment warranty is 12 months upon you receipt of the equipment
2). Can you provide third-lab calibration certificate?
Answer: Yes, the equipment can send to the third-labs authorized by ISO17025 and get the calibration certificate, but the buyer should undertake the charges.
3). Does this equipment has English operation interface?
Answer: of course, yes, the operation interface has English instruction.
4). What should we pay attention to during use?
●Do not operate the equipment under the high humidity conditions (R.H.: 30%~60%)
● The F.G. terminal should well connect with the earth.
● Do not touch the electrode of the gun to prevent from electric shock after power on.
● Do not pull the cable when pull out the plug.
●Make sure the equipment is under the STOP mode before power of the equipment.
Contact Person: Ms. Penny Peng